ANNY BP B8 LD Systems
Bodypack Transmitter for ANNY®
Overview
ANNY BP B8 at a Glance
The ANNY® bodypack transmitter with the B8 frequency band operates in the 823 - 832 MHz and 863 - 865 MHz frequency range. Equipped with a mini-XLR input and input level switch, it can be used with both active and passive microphones and instruments. With an output power of 10 mW, the bodypack transmitter allows audio transmission up to 80 metres. The bodypack transmitter is easily and conveniently synchronised with the ANNY® receiver via infrared. Powered by two AA batteries (included), the ANNY BP can operate for up to eight hours without a battery change. A built-in status LED gives a white light when switched on and a red light when the battery is low. The power switch also provides a standby function for temporary muting, ideal for breaks in use without having to switch off the unit completely.
- Bodypack transmitter incl. 2x AA batteries
- Up to 80 metres range
- Mini XLR input
- 8 hours operating time
- Input level switch (MIC, 0dB, -10dB)
- Standby mode
- Integrated status LED
General
| Wireless frequencies | 823 - 832 MHz / 863 - 865 MHz |
|---|---|
| Frequency response (-3 dB, rel. Avg) | 45 Hz |
| Colour | Black |
Radio transmission
| Channels | 12 |
|---|---|
| Transmitting power | 10 mW |
| Antennas | 1 (fixed) |
| Frequency synchronization via IR | 0 |
Inputs
| Input connector types | Mini XLR male |
|---|
Signal processing
| Min. Signal-to-noise ratio (SNR) | 100 dB |
|---|
Battery operation
| Batteries | 2 x 1.5 V AA/LR6 @ max.8 h |
|---|---|
| Built in battery tester | 0 |
Dimensions & weight
| Width | 64 mm |
|---|---|
| Height | 100 mm |
| Depth | 21 mm |
| Weight | 9 g |
Specifications
Technical Specifications
Full published figures for the ANNY BP B8 by LD Systems.
- Dimensions (L x W x H)
- 21 x 64 x 100 mm
- Weight
- 0.01 kg