SIGMAX39T1X1BF Prolights
Outdoor LED wall module, SMD1921 BF, p.3,9, 50x50cm, 128x128pix, 3500 nit, 8,6kg
Overview
SIGMAX39T1X1BF at a Glance
SigmaPix 39T is a rental LED screen for outdoor use with a 3,9 mm pixel pitch, designed to meet requirements for touring, events and install applications. The outdoor Black&White& White LEDs grant a high brightness but increase contrast and the color gamut of the screen for an unprecedented visual experience both indoor and outdoor.
This series is available in both 50x50cm and 50x100cm tiles, mechanically compatible in order to assemble a large surface of screen in a shorter time.
The mechanical design of the tiles has been conceived to allow fast single person installation with automatic lock design and extra safety & handling features such as flip corner shield and bottom protection.
Panel maintenance has been furtherly enhanced allowing quick replacement of LED modules and the PSU unit.
SigmaPix 39T tiles have on board curve mechanics allowing both concave and convex precise installation of +10° / -10° each tile and the weight has been reduced down to 8,6 kg (50x50) / 14,6 kg (50x100) per panels (34,4 /29,2 kg per sqm)
SigmaPix 39T is truly creative and it is enriched by the special C tiles, a special 90° cutted edge panel on every side allowing to create 90° seamless corner on every edge.
The on-board electronics include the latest generation of Novastar A8s receiver card and refresh rate up to 3.840 Hz.
SigmaPix 39T is a rental LED screen for outdoor use with a 3,9 mm pixel pitch, designed to meet requirements for touring, events and install applications. The outdoor Black&White& White LEDs grant a high brightness but increase contrast and the color gamut of the screen for an unprecedented visual experience both indoor and outdoor.
This series is available in both 50x50cm and 50x100cm tiles, mechanically compatible in order to assemble a large surface of screen in a shorter time.
The mechanical design of the tiles has been conceived to allow fast single person installation with automatic lock design and extra safety & handling features such as flip corner shield and bottom protection.
Panel maintenance has been furtherly enhanced allowing quick replacement of LED modules and the PSU unit.
SigmaPix 39T tiles have on board curve mechanics allowing both concave and convex precise installation of +10° / -10° each tile and the weight has been reduced down to 8,6 kg (50x50) / 14,6 kg (50x100) per panels (34,4 /29,2 kg per sqm)
SigmaPix 39T is truly creative and it is enriched by the special C tiles, a special 90° cutted edge panel on every side allowing to create 90° seamless corner on every edge.
The on-board electronics include the latest generation of Novastar A8s receiver card and refresh rate up to 3.840 Hz.
Features:Outdoor Black LEDs
Single person installation, auto lock design, scratch protection and flip corner shield
Fast LED Module and PSU replacement
Built in curve mechanics for +10° / -10° concave & convex
Special C (90° corner) cabinet for unprecedented design
Refresh rate of 3.840 Hz
- Driver chip type:MBI 5253
- LED source:Kinglight SMD1921 full black
- Pixel pitch:3.9 mm
- Panel resolution:128x128pixels
- Module resolution:64x64pixels
- Luminous flux:3.500nit
- Contrast:6.000:1
- Grayscale:14 bit
- Refresh rate ≥:3.840Hz
- Drive Mode:1/16 scan, constan current
- Vertical viewing angle:120°
- Horizontal viewing angle:140°
- LED density:65.536LED/sqm
- Dead Pixel Ratio:<0.002
- LED avg life span:100.000 h
- Power input/output:IPKON Seetronic IN/OUT
- Power supply:AC 110/230 V 50/60 Hz
- Max power consumption (panel):220W
- Avg power consumption (panel):88W
- Max power consumption (sqm):880W
- Avg power consumption (sqm):352W
- Standby power consumption (pannello):50W
- Max rated current/panel::AC 220V / 1 A
- Working temperature:-20°C / +50°C
- Working humidity:10~90 RH%
- Receiving card type:A8S-N
- Other controllers type:mapping, firmware copy, RCFGX restore, calibration restore, rotation supported, calibration chip on LDM (auto calibration)
- Control protocol:Novastar
- Signal input:waterproof Seetronic RJ45
- Signal output:waterproof Seetronic RJ45
- Other specifics:curve configurations (mechanics on board), corner protection, bottom protection, auto-lock mechanics
- Magnetic LED modules:not available
- Module size (WxH):250x250mm
- Panel size(WxHxD):500×500×83mm
- Vertical hanging system:built-in aliscaf clamp support
- Connection:seamless locking system
- Panel weight:8,6kg
- Weight per square meter:34,4kg
- Hanging Panel Quantity ≤:20 for hanging and 12 for stacking
- IP rating:IP65 for temporary outdoor use
- Cooling:fan-free with natural convection
- Housing:Die-cast aluminium housing
- Finish:black
- Curve configurations:convex and concave -10° / +10°
- Compliance:CE, UKCA, cURus
Specifications
Technical Specifications
Dimensioned drawing for the SIGMAX39T1X1BF by Prolights.
Documentation
Downloads
Datasheets, manuals and drawings for the SIGMAX39T1X1BF.