Description
The DX0.4 offers a substantial array of processing options. Routing is freely assignable from the 2 inputs to the 4 outputs. Input and output equalisation is available with a choice of 14 filter options. An input noise gate will help deal with noisy signal sources. Input and output delay is availabl
Specifications
Name | Value |
---|---|
Input impedance: | 20k Ohm balanced |
Output Imp: | 100R |
Max Input level: | +20dBu |
Max Output level: | +18dBu |
Crosstalk: | <-95dB |
Sample Rate: | 96kHz |
Signal to noise ration | >113dB (A weighted) |
Noise Floor: | <-94dB (A weighted) |
Common Mode Rejection Ratio | 60dB |
Frequency Response: | 20Hz - 40kHz +0.3dB |
Input A/D Dynamic range: | 118dB |
Output D/A Dynamic range: | 118dB |
THD (+4dBu 1kHz): | <0.003% |
Mains Voltage Range: | 85-230VAC 50-60Hz |
Nominal power Consumption: | 30W |
Audio input: | 2 x 3 pin female XLR |
Audio output: | 4 x 3 pin male XLR |
Ethernet: | Shielded RJ45, Dynamic or Static IP |
RS485: | 2 x RJ45 |
USB: | 1 x USB B (Front Panel) |
Mains: | 3 pin IEC |
Signal Generator: | White/pink noise, -30dBu to +10dBu |
Gain: | -18dB to +12dB, step accuracy 0.1dB |
Input Equaliser: | 10 band PEQ, gain range +15dB 14 x Filter types |
Input Gate: | Threshold: -40 to -80dBu Attack: 1 to 1,000ms Release: 1 to 1,000ms |
ROUTING: | Freely assignable 2-in, 4 out Up to 30dB attenuation on each node |
Delay: | Input: 600ms Output: 200ms Steps: 20us, Units: milliseconds, metres, feet |
Output Filters: | High & Low Pass, -6dB/Octave to -48dB/Octave Slope types: Butterworth, Bessel, Linkwitz Riley |
Output Equalisation: | 8 band PEQ, gain +15dB 14 x filter types FIR Filter Import |
Program Limiter: | Threshold: -10 to +20dBu Attack: 1 to 1,000ms Release: 10 to 3,000ms |
Peak Limiter: | Threshold: 0 to 12dB above Program Limiter Threshold Release: Fast (91ms), Medium (350ms), Slow (800ms) |
Height: | 1U (44mm) [1.75”] |
Width: | 482mm [19”] |
Depth: | 230mm [9.1”] |
Weight: | 3.0kg [6.6lb] |